History of the Bicycle
|The Walking Machine|
|In 1817 Baron von Drais invented a walking machine that would help him get around the royal gardens faster: two same-size in-line wheels, the front one steerable, mounted in a frame which you straddled. The device was propelled by pushing your feet against the ground, thus rolling yourself and the device forward in a sort of gliding walk. The machine became known as the Draisienne or hobby horse. It was made entirely of wood. This enjoyed a short lived popularity as a fad, not being practical for transportation in any other place than a well maintained pathway such as in a park or garden.|
|The Velocipede (Boneshaker)|
|The next appearance of a two-wheeled riding machine was in 1865, when pedals were applied directly to the front wheel. This machine was known as the velocipede ("fast foot"), but was popularly known as the bone shaker, since it was also made entirely of wood, then later with metal tires, and the combination of these with the cobblestone roads of the day made for an extremely uncomfortable ride. They also became a fad, and indoor riding academies, similar to roller rinks, could be found in large cities.|
|The High Wheel Bicycle||
|In 1870 the first all metal machine
appeared. (Previous to this metallurgy was not advanced enough to provide
metal which was strong enough to make small, light parts out of.) The pedals
were still attached directly to the front wheel with no freewheeling
mechanism. Solid rubber tires and the long spokes of the large front wheel
provided a much smoother ride than its predecessor. The front wheels became
larger and larger as makers realized that the larger the wheel, the farther
you could travel with one rotation of the pedals. You would purchase a wheel
as large as your leg length would allow. This machine was the first one to
be called a bicycle ("two wheel"). These bicycles enjoyed a great popularity
among young men of means (they cost an average worker six month's pay), with
the hey-day being the decade of the 1880s.
Because the rider sat so high above the center of gravity, if the front wheel was stopped by a stone or rut in the road, or the sudden emergence of a dog, the entire apparatus rotated forward on its front axle, and the rider, with his legs trapped under the handlebars, was dropped unceremoniously on his head. Thus the term "taking a header" came into being.
|The High Wheel Tricycle|
|While the men were risking their necks on the high wheels, ladies, confined to their long skirts and corsets, could take a spin around the park on an adult tricycle. These machines also afforded more dignity to gentlemen such as doctors and clergymen. Many mechanical innovations now associated with the automobile were originally invented for tricycles. Rack and pinion steering, the differential, and band brakes, to name a few!|
The High Wheel Safety
|Improvements to the design began to be seen, many with the small wheel in the front to eliminate the tipping-forward problem. One model was promoted by its manufacturer by being ridden down the front steps of the capitol building in Washington, DC. These designs became known as high-wheel safety bicycles. Since the older high-wheel designs had been known simply as bicycles, they were now referred to as "ordinary bicycles" in comparison with the new-fangled designs, and then simply as "ordinaries."|
|The Pnuematic-Tired Safety|
The pnuematic tire was first applied to the bicycle by an Irish veterinarian who was trying to give his young son a more comfortable ride on his tricycle. This inventive young doctor's name was Dunlop. Sound familar? Now that comfort and safety could be had in the same package, and that package was getting cheaper as manufacturing methods improved, everyone clamored to ride the bicycle. This 1898 Yale uses a shaft drive to dispense with the dirty chain.
It was a practical investment for the working man as transportation, and gave him a much greater flexibility for leisure. Ladies could ride a much more versatile machine and still keep their legs covered with long skirts. The bicycle craze killed the bustle and the corset, instituted "common-sense dressing" for women and increased their mobility considerably. In 1896 Susan B. Anthony said that "the bicycle has done more for the emancipation of women than anything else in the world."
Bicycling was so popular in the 1880s and 1890s that cyclists formed the League of American Wheelman (still in existence and now called the League of American Bicyclists). The League lobbied for better roads, literally paving the road for the automobile.
|The Kid's Bike|
|Introduced just after the First World War by several manufacturers, such as Mead, Sears Roebuck, and Montgomery Ward, to revitalize the bike industry (Schwinn made its big splash slightly later), these designs, now called "classic", featured automobile and motorcyle elements to appeal to kids who, presumably, would rather have a motor. If ever a bike needed a motor, this was it. These bikes evolved into the most glamorous, fabulous, ostentatious, heavy designs ever. It is unbelievable today that 14-year-old kids could do the tricks that we did on these 65 pound machines! They were built into the middle '50s, by which time they had taken on design elements of jet aircraft and even rockets. By the '60s, they were becoming leaner and simpler.|
information gathered from http://www.pedalinghistory.com/PHhistory.html